background image

12

   |   Operation

Napoleon.com

   |   Rogue® Series Grills

O

pe

ra

tio

n

t

he

 g

rilling

 e

xperience

 c

heckliSt

Refer to this list every time you grill

 

Read Owner’s Manual

Be sure to have read the owner’s manual and all the safety instructions.

 

Clean grease tray

Always ensure you clean the grease tray prior to grilling to avoid fires and flare-ups.

 

Check the hose

Ensure the grill is off and cool. Check the hose for evidence of excessive abrasions, 
or cuts. Have the hose replaced before use if the hose is damaged.

 

Preheat and clean grids 

Coat the grids with vegetable shortening and preheat your grill to burn off 
excess residue and prevent sticking. Clean cast iron grids with a brass 
wire brush and stainless steel grids with a stainless brush. See "

Cleaning 

Instructions"

NOTE

: Stainless steel cooking grids are corrosion resistant and require less 

maintenance than cast iron grids. 

 

Prep area

Make sure everything you need while grilling such as your utensils, seasonings, 
sauces, and dishes are within your reach. Don’t leave your food unattended, or it 
could burn.

 

Flip once and do not peek

Try not to open the lid and peek too much, or heat will escape and throw your 
temperature and cooking times off. Flip your food only once, especially steak and 
chicken.

 

Leave space

Leave some space on the grill and between food, so you have room to move food 
around if you need to.

 

Use a thermometer

Use a thermometer to ensure food is cooked thoroughly. Follow the appropriate 
temperatures guidelines for all types of meat, especially poultry.

h

ow

 

to

 

SeaSon

 

caSt

 

iron

 

cooking

 

gridS

This procedure MUST be done prior to first use and repeated every 3-4 uses to keep grids looking new.

 

1.  Remove cast iron grids from the grill.
2.  Wash grids with warm soapy water and soft cloth.  

Pat dry and allow grids to completely dry. 

3.  Apply fat/oil evenly using a silicone brush on both 

sides.

4.  Preheat appliance to 350°F - 400°F (176°C - 204°C).
5.  Install cooking grids and cook for 30 minutes.

6.  Apply a second even coat of fat/oil on cooking grids, 

and keep cooking for 30 more minutes.

7. Grids are now seasoned. 

 

NOTE: 

If rust has formed on the cast iron grids, 

remove the rust with scouring pad or brass brush and 

repeat the seasoning process.

GRILLING 

PRO TIP!

Always preheat the grill 
before cooking to burn 
off leftover residue and 
prevent food from sticking 
to the grate.

OIL AND FAT 

SUGGESTION!

Grapeseed Oil
Sunflower Oil
Soybean Oil
Extra Virgin Olive Oil
Canola Oil

If not available, select an oil 
or fat that has a high smoke 
point. Do not use salted fats 
like butter or margarine.

• 
• 
• 
• 
• 

BE  

CAREFUL!

The lid of the grill and 
the entire firebox can 
become very hot when 
in use.

Содержание ROGUE Series

























Отзывы: