Napoleon PTH31GT, Руководство пользователя

Страница: 4 / 23

4
www.napoleongrills.com
General Information
This gas torch is certified under Canadian and American national standards, CSA 2.37a – 2008 and ANSI Z83.26a - 2008
respectively for outdoor patio heaters and must be installed to conform with local codes.
When an appliance is for connection to a fixed piping system, the installation must conform with local codes
or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and
Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2.
CALIFORNIA PROPOSITION 65 : The burning of gas fuel creates by-products, some of which are on the list as
substances known by the State of California to cause cancer or reproductive harm. When heating with gas,
always ensure adequate ventilation to the unit, to minimize exposure to such substances.
Propane Cylinder Specifications
WARNING!
If these instructions are not followed exactly, a fire causing death or serious injury may
occur.
A dented or rusty cylinder may be hazardous and should be checked by your propane supplier. Never use a
cylinder with a damaged valve. Use only a propane supply cylinder constructed and marked in accordance with
the specifications for LP-gas cylinders of the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres
and Tubes for Transportation of Dangerous Goods; and Commission, as applicable or the Specifications for
LP-Gas Cylinders of the U.S. Department of Transportation (D.O.T.). This appliance has been designed for use
with a 20 lb. (9.1 kg) or 30 lb (13.6 kg) size propane cylinder only (not supplied).
The propane cylinder must be provided with a cylinder connection device compatible with the connection for
outdoor gas appliances. The propane cylinder must be provided with a shut-off valve terminating in a propane
cylinder valve type QCC1, and a safety relief device having direct communication with the vapor space of the
cylinder. The cylinder supply system must be arranged for vapor withdrawal and the cylinder shall include a
collar to protect the cylinder valve. The cylinder shall incorporate a listed OPD (overfill protection device). Do
not store a spare LP-gas cylinder under or near this appliance. Never fill the cylinder beyond 80 percent full.
Place the dust cap on the cylinder valve outlet whenever the cylinder is not in use. Only install the type of
dust cap on the cylinder valve that is provided with the cylinder valve. Other types of caps or plugs may result
in leakage of propane.
Use only the pressure regulator and hose assembly provided with this patio torch. Replacement pressure
regulators and hose assemblies must be specified by the manufacturer. Do not store a spare propane cylinder
on the shelf beneath the torch.
The regulator supplies a pressure of 11 inches. water column to the patio torch and has a QCC1 type fitting.
Cylinders to be used with this unit must be supplied with a QCC1 cylinder valve. A QCC1 cylinder has a positive
seating connection, which will not allow gas flow until a positive seal has been achieved. It is also equipped
with an excess flow device. In order to attain full flow to the torch, the valve must be in the off position when
the cylinder valve is turned on.
Gas Hook-Up Instructions
WARNING!
Installation and repair must be done by a qualified service person. The appliance must be
inspected before use and at least annually by a qualified service person. More frequent cleaning may be
required as necessary. It is imperative that the control compartment, burners and circulating air passages
of the torch be kept clean.