W415-1068 / B / 01.02.14
34
EN
A.
There are 8 spring latches securing the main
glass door, 4 of those latches are across
the top and 4 along the bottom. To access
these latches, the 4 piece door trim must be
removed.
B.
Using the tool provided, pull the latch forward
and upwards, out of the slot in the door for the
top latches and reverse for the bottom latches,
as shown. Repeat 7 times. Ensure to keep one
hand on the door at all times, to prevent it from
falling on the
fl
oor.
C.
When all 8 latches have been released pull the
door forward and off of the appliance.
D.
Reverse this process to install the door.
IMPORTANT: Once latches are engaged,
test that the door is secure and will not
fall forward before letting go.
LATCHES
MAGNETS
THE 8 LATCHES ARE SHOWN IN THE ILLUSTRATION BELOW.
NOTE: It is recommended to perform this task with two people
A.
Place the magnets provided onto the door, ensure they are evenly spaced along all sides, 4 magnets
should be placed on both top and bottom and 2 along each side, as shown in the above illustration.
B.
Secure the 2 sides of the trim to the magnets, prior to the top and bottom pieces.
C.
Push the sides of the trim until they are snug against the
fi
nishing edge of the appliance.
D.
Secure the top and bottom trim to the magnets, ensure the logo remains in the bottom left corner.
6.2 TRIM
INSTALLATION