background image

 

7

www.napoleongrills.com

Operating The Grill

Initial Lighting

: When lit for the first time, the gas grill emits a slight odor. This is a normal temporary condition 

caused by the “burn-in” of internal paints and lubricants used in the manufacturing process and does not occur 

again. Simply run the main burners on high for approximately one-half hour. 

Main Burner Use

:  When searing foods, we recommend preheating the grill by operating all main burners 

in the high position with the lid closed for approximately 10 minutes.  Food cooked for short periods of time 

(fish, vegetables) can be grilled with the lid open. Cooking with the lid closed will ensure higher, more even 

temperatures that can reduce cooking time and cook meat more evenly. Food that has a cooking time longer 

than 30 minutes, such as roasts, can be cooked indirectly (with the burner lit opposite to the food placement). 

When cooking very lean meats, such as chicken breasts or lean pork, the grids can be oiled before pre-heating 

to reduce sticking. Cooking meat with a high degree of fat content can create flare-ups. Either trim the fat or 

reduce temperatures to inhibit this. Should a flare-up occur, move food away from the flames and reduce the 

heat. Leave the lid open.  See 

Your All Season Grill

 cookbook by Napoleon for more detailed instructions.

Direct Cooking

: Place food to be cooked on the grill directly over the heat. This method is generally used for 

searing or for foods that do not require prolonged cooking times such as hamburgers, steaks, chicken pieces, 

or vegetables. The food is first seared to trap-in the juices and flavor, and then the temperature is lowered to 

finish cooking the food to your preference.

Indirect Cooking

: With one or more burners operating, place food to be cooked on the grill over a burner that 

is not operating. The heat circulates around the food, cooking slowly and evenly. Cooking with this method is 

much the same as cooking in your oven and is generally used for larger cuts of meats such as roasts, chickens 

or turkeys, but can also be used for cooking foods that are prone to flare-ups or for smoking foods. Lower 

temperatures and slower cooking times result in tender foods.

Rear Burner Use (If Equipped)

:  Remove the warming rack prior to use. Cooking grids should also be removed 

if they interfere with the rotisserie.  The rear burner is designed to be used in conjunction with the rotisserie 

kit (included with most rear burner units) available from your dealer.  See the rotisserie kit assembly instructions.  
To use the counterbalance - remove the rotisserie motor from the gas grill.  Place the spit with meat being 

cooked across the hangers inside the grill.  The meat will naturally hang with the heavy side down.  Tighten 

the counterbalance arm and weight so the arm is facing up.  Slide the counterweight in or out to balance the 

load and tighten in place.  Re-install the motor and begin cooking.  Place a metal dish underneath the meat to 

collect drippings for basting and naturally delicious gravy. Basting liquid may be added as required.  To seal in 

juices, first operate rear burner on high until brown, then reduce the heat to thoroughly cook foods.  Keep the 

lid closed for best results.  Your roasts and fowl will brown perfectly on the outside and stay moist and tender 

on the inside.  For example, a 3 pound chicken on the rotisserie will be done in approximately 1½ hours on 

medium to high.  See ‘Your all Season Grill’ cookbook by Napoleon for more detailed instructions.

WARNING!

 Barbecue sauce and salt can be corrosive and will cause rapid deterioration of the gas grill 

components unless cleaned regularly.  When finished cooking disassemble rotisserie components, wash 

thoroughly with warm soapy water and store indoors.

Содержание LD485RB





































Отзывы: