Napoleon ld410, Руководство пользователя

Страница: 6 / 48

www.napoleongrills.com
6
EN
Lighting Instructions
Off Position
WARNING!
Open lid.
WARNING!
Ensure all burner controls are in the off position. Turn on the gas supply
valve.
Main Tube Burner Lighting
1. Open grill lid.
2. Push and turn any main burner knob slowly to the ’hi’ position. This action will ignite the
pilot flame which will in turn light the selected burner. If the pilot lights, continue to push
down on the control knob until the burner lights and then release.
3. If the pilot does not ignite, then immediately turn the control knob back to the ‘off position
and repeat step 2 several times.
4. If the pilot and burner will not ignite within 5 seconds, turn the control knob to the ‘off’
position and wait 5 minutes for any excess gas to dissipate. Either repeat steps 2 and 3 or light
with a match.
5. If lighting the unit with a match, clip the match into the supplied lighting rod. Hold the lit
match down through the grill and sear plate while turning the corresponding burner valve to
high.
WARNING!
The propane cylinder is equipped with an excess flow device. Unless all burners are
turned off prior to turning the cylinder on, only small flames and low heat will be achievable.
WARNING!
Do not use the rear burner (rotisserie burner) with the main burners operating.
Left
Burner
Right
Burner
Center
Burner