8
W415-0369 / A / 03.12.03
HINGE SCREEN
C
UPPER LOUVRES:
In-
sert the upper louvres
into the slots on both
brackets. Press the top
flange of the hood into
the four clips located
along the top of the unit
as shown.
LOWER LOUVRES:
At-
tach each hinge to the fire-
box with 2 screws.
HINGE SCREEN:
Position the hinge screen into place
and with the control door open, secure to the firebox using
three screws.
The curtain mesh must be kept fully closed during opera-
tion to help prevent accidental burns from occurring.
The heater must not be used when the hood is re-
moved.
Hook the hood over the lip of the curtain support
plate.
Remove the
backing of the
l o g o s u p p l i e d
and place on the
screen cover, as
indicated.
LOGO PLACEMENT
HOOD
FIGURE 14
LOUVRE
HOOD
SLOT
BRACKET
A
LOUVRE INSTALLATION
LOWER LOUVRES
(VALVE CONTROL DOOR)
B
FIGURE 15a-c
HOOD
CURTAIN
MESH
FIGURE 12
FIGURE 13
