Napoleon GDS26P-1, Инструкция по установке и эксплуатации

Страница: 22 / 106

W415-2183 / B / 02.10.17
22
EN
3.12 REAR VENT CONVERSION
7'' (178mm)
Cover Plate
4'' (102mm)
Gasket
4'' (102mm)
Collar
7'' (178mm)
Gasket
7" (178mm)
Collar
Outer Top
4'' (102mm)
Cover Plate
1
2
3
5
4
6
7
8
9
- Remove the rear shield and the knockout
- Remove the outer top.
- Replace components 3 through 6 onto the rear of
the appliance.
- Replace components 7 through 10 onto the top of
the appliance.
- Before replacing the rear shield, slide the vent pipe through
the rear shield a few inches, secure 4'' (102mm) and
7'' (178mm) to the collars.
- Slide the rear shield along the vent pipe and re-secure to
the appliance.
- Complete vent installation.
10
Rear Shield
Knockout
SAFETY
BARRIER
4'' (102mm)
Gasket
7'' (178mm)
Gasket
In order to convert the venting configuration from a top exit to a rear exit, remove components as illustrated:
When reinstalling in the alternate position: Check gaskets for tears, replace if necessary to ensure a proper seal.