Napoleon BIPRO 825, Инструкция по эксплуатации

Страница: 5 / 72

5
www.napoleongrills.com
EN
Technical Data
The following table lists input values for the appliance.
Burner
Orifice Size (Gross) Heat Input (Total) Gas Usage (Total)
I I I
Main (Flame) #60 15.2 kW 1120 g/hr
Main (Infra Red) #60 7.6 kW 560 g/hr
Rear 1.25mm 5.5 kW 400 g/hr
Smoker #67 2.5 kW 182 g/hr
Warming #67 2.5 kW 182 g/hr
Certified Gases / Pressures - Check rating plate to ensure that it corresponds with following list.
Do not tamper with or modify regulator. Use only regulators which supply the pressure listed in the table
above. The grill is equipped with an internal regulator. This internal regulator has an outlet pressure of
24.5 mbar for propane/butaneand must not be modified or adjusted. For replacement, use only the
regulator specified by the manufacturer.
This unit includes an internal regulator which stabilizes the gas pressure and improves grill performance.
This regulator cannot be adjusted. There is a pressure tap located on the side of the regulator. It can
be used by a qualified service person when servicing the grill to determine if the regulator is functioning
properly. The screw within the pressure tap must always be kept tight, except when performing a pressure
test on the regulator (qualified service personnel only).
Gas Category I
3B/P(30)
I
3+(28-30/37)
I
3B/P(37)
I
3B/P(50)
Orifice Sizes(see
above)
I I I I
Gases / Pressures Butane and Propane
at 30mbar
Butane 28-30mbar
Propane 37mbar
Butane and Propane
at 37mbar
Butane and Propane
at 50mbar
Countries BE, BG, CY, DK, EE, FI,
FR, GB, HR, HU, IS, IT,
LT, LU, MT, NL, NO,
RO, SE, SI, SK, TR
BE, CH, CY, CZ, ES,
FR, GB, GR, IE, IT,
LT, LU, LV, PT, SK, SI
PL AT, CH, DE, SK