background image

DANGER

IF YOU SMELL GAS:

•  Shut off gas to the appliance.
•  Extinguish any open flame.
•  Open lid.
•  If odor continues, keep away from the 

appliance and immediately call your gas 

supplier or fire department.

APPLY SERIAL NUMBER LABEL FROM CARTON

Serial No. 

XXXXXX000000

MODEL NO. 

Notice to Installer: Leave these instructions with the grill owner for future reference. 

This gas grill must be used only outdoors in a well-ventilated space and must not be used inside a 

building, garage, screened-in porch, gazebo or any other enclosed area.

WARNING!

 CABINET FRAME, CABINET AND COUNTER TOP MUST BE MADE FROM NON-COMBUSTIBLE MATERIAL.

BILEX730

 

www.gtrc.gov.au

N415-0326-AU SEP 19.14

SAI Global

SAI-400025

AS4557

DO NO

T REMOVE

Napoleon Group of Companies

214 Bayview Dr., Barrie, Ontario, Canada L4N 4Y8 

Phone: 1-705-726-4278 Fax: (705)725-2564

www.napoleongrills.com

 

Customer Solutions: 1-866-820-8686 or 

[email protected]

WARNING

Do not try to light this appliance without 

reading the “LIGHTING” instructions section of 

this manual.
Do not store or use gasoline or other 

flammable liquids or vapors in the vicinity of 

this or any other appliance.  A ULPG cylinder 

not connected for use must not be stored in 

the vicinity of this or any other appliance. 

If the information in these instructions is 

not followed exactly, a fire or explosion may 

result, causing property damage, personal 

injury or death.

Содержание BILEX730

































Отзывы: