W415-1696 / 10.12.16
29
EN
5.7
LED REPLACEMENT
A.
Find the connector on the PCB for the LED you want to replace and unplug it (Section 5.8 Figure 1).
B.
Cut the cable tie.
C.
Unscrew the LED strip from the appliance. If unscrewing the log LEDs, use a pair of needle nose
pliers to hold the plastic plugs in place.
D.
Screw in the new LED strip onto the appliance and connect the wires to the designated quick connect
plugs.
E.
Using a cable tie, secure the wires.
A.
To gain access to the remote receiver or thermostat, see sections 5.0 - 5.4 and 5.11 (Step B).
B.
Find the connector on the PCB for the component you want to replace and uplug it (Figure 1).
C.
Cut the cable tie.
D.
Unscrew the component from the appliance.
E.
Screw the new component and connect the wires to the designated quick connect plugs.
F.
Using a cable tie, secure the wires.
THERMOSTAT
REMOTE RECEIVER
CONTROL PANEL
DECORATIVE LED
FLAME LED
EMBER BED / LOG LED
FIG. 1
5.8
REMOTE RECEIVER / THERMOSTAT REPLACEMENT
Содержание BEF33H
