Napoleon B52NTL, Инструкция по установке и эксплуатации

Страница: 6 / 28

G. Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H. Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I. Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J. Align the hole and the pin in the right
crossover log with the pin in the top rear
log and the hole in the top right log.
K. Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L. Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
the front left crossover log.
G
H
I
J
K
L
6
W415-1632 / C / 10.21.16
EN