Napoleon B52NTL, Инструкция по установке и эксплуатации

Страница: 2 / 28

A. Remove the door,
refer to installation
instructions. Remove
the 8 securing screws
and lift the plate
up and out of the
appliance. Gasket will
need to be replaced if
damaged.
A. Attach the burner assembly to the firebox
base with the 2 screws supplied.
This burner and log assembly are approved for use in the HDX52 gas fireplace only. They are not approved for
use as a stand alone appliance or in conjunction with any other appliance.
1.0 GENERAL INFORMATION
2.0 INSTALLATION
2.1 ACCESS PANEL
2.2 BURNER ASSEMBLY
1.0 GENERAL INFORMATION 2
2.0 INSTALLATION 2
2.1 ACCESS PANEL 2
2.2 BURNER ASSEMBLY 2
2.3 BULKHEADS 3
2.4 HEARTH PANEL INSTALLATION 4
2.5 HEARTH LOG & LOG PLACEMENT 5
2.6 CHARCOAL LUMPS 7
2.7 CHARCOAL EMBERS 7
2.8 VERMICULITE 7
2.9 GLOWING EMBERS 7
3.0 ADJUSTMENT 8
3.1 FLAME CHARACTERISTICS 8
4.0 REPLACEMENTS 9
4.1 LOG BURNER ASSEMBLY (NG) 10
4.2 LOG BURNER ASSEMBLY (P) 11
5.0 NOTES 12
INSIDE UNIT
OUTSIDE UNIT
2
W415-1632 / C / 10.21.16
EN
NOTE: Changes, other than editorial, are denoted by a line in the margin.
TABLE OF CONTENTS