W415-2744 / A / 11.04.19
EN
2
table of contents
A.
Remove the door,
refer to installation
instructions. Remove
the 8 securing screws
and lift the plate
up and out of the
appliance. Gasket
may need to be
replaced if damaged.
This glass burner assembly is approved for use in the HDX52-1 gas appliance only. It is not approved for use as a
stand alone appliance or in conjunction with any other appliance.
1.0 general
information
2
2.0 installation
2
2.1 access
panel
2
2.2 burner
assembly
2
2.3 bulkheads
3
2.4 media
tray
3
2.5 glass
media
4
3.0 adjustment
5
3.1 fl
ame
characteristics
5
3.2 venturi
adjustment
5
4.0 replacement
parts
6
4.1 overview
6
4.2
B52NG-1 glass burner
7
2.1 access
panel
2.2 burner
assembly
INSIDE APPLIANCE
OUTSIDE APPLIANCE
note:
Install decorative panels before burner assembly.
A.
Attach the burner assembly to the
fi rebox base with the screws supplied.
1.0 general information
2.0 installation
!
WARNING:
This product can expose you to chemicals including lead and lead compounds,
which are known to the State of California to cause cancer, and chemicals including carbon
monoxide, which are known to the State of California to cause birth defects or other reproduc-
tive harm. For more information, go to www.P65Warnings.ca.gov.
The information throughout this manual is believed to be correct at the time of printing. Wolf Steel Ltd. reserves
the right to change or modify any information within this manual at any time without notice. Changes, other than
editorial are denoted by a vertical line in the margin.
note:
EN
