Napoleon 9600E E-STAR Series, Инструкция по установке и эксплуатации

Страница: 7 / 76

W415-2159 / D / 11.24.17
7
IOM
FIGURE 1 - FURNACE DIMENSIONS AND CLEARANCE TO COMBUSTIBLES
TOP LEFT SIDE RIGHT SIDE
0"
Top
NOTES:
S - Service clearance 24 inches (610mm) or more.
C - Combustible floor (but not carpet or non-ceramic tile).
All models approved for closet installation.
Plenum
1/2" (13mm)
on all sides
0"
0"
0"
0"
H3.6A
WARNING
! !
WHEN THIS FURNACE IS INSTALLED IN A STORAGE GARAGE, IT MUST BE INSTALLED
SO THE BURNERS AND IGNITION SOURCE ARE LOCATED NO LESS THAN 18” (457 mm)
ABOVE THE FLOOR TO PREVENT THE RISK OF IGNITING FLAMMABLE VAPORS WHICH
MAY BE PRESENT IN THE GARAGE.
THE FURNACE MUST BE LOCATED OR PROTECTED TO AVOID PHYSICAL DAMAGE BY
VEHICLES.
FAILURE TO HEED THESE WARNINGS CAN CAUSE A FIRE OR EXPLOSION, RESULTING
IN PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
TABLE A - FURNACE DIMENSIONS
MODEL
INPUT
HIGH
OUTPUT
HIGH
INPUT
LOW
OUTPUT
LOW Width Depth Height Supply Air Return Air
K/Btu/hr A B C (F x G) (D x E)
40 40.0 38.0 28.0 26.6
17 1/2"
(445mm)
29 1/2"
(749mm)
32 7/8"
(835mm)
16 1/2" x 19 5/8"
(419mm x 499mm)
14" x 23"
(356mm x 584mm)
60 58.0 55.0 40.6 38.6
80-3* 77.0 73.5 53.9 51.2
80-4** 77.0 73.5 53.9 51.2
22 1/2"
(572mm)
21 1/2" x 19 5/8"
(546mm x 499mm)
100 100.0 95.0 70.0 66.5
120 120.0 114.0 84.0 79.8
NOTE: * 3 TON, ** 4 TON
H12.6.9A
H12.11.5
UPFLOW
TOP 0
PLENUM TOP 1/2" (13mm)
FRONT 0*
BACK 0
SIDES 0
BOTTOM 0***
FLUE PIPE 0
ENCLOSURE CLOSET
TABLE B - MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS
*24" (610mm) REQUIRED FOR SERVICE
**SUPPLY AIR OUTLET / 1/2"
(13mm) RETURN AIR INLET
*** CERTIFIED FOR CLOSET INSTALATION ON COMBUSTIBLE FLOORING.