Attach the rainfly to the
clips found at the bottom
corners of the tent.
Tighten the straps and
secure the Velcro tabs
around the poles.
Locate the rainfly pole and
insert it into the sleeve
located above the door.
Place the end of the pole
into the grommet hole
located on the pole sleeve.
Repeat on the other side
Stake the rainfly guy lines
to the ground.
B. Attach the clips located on the
tent to the corner-to-corner pole on
the truck tent (1 per side).
Stake down the tent through the
corner and entrance webbing loops.
9
10
Drape the rainfly over the tent. The side that says “Truck Tent Side” goes towards the truck.
11
12
13
14
To install the gear loft, place each
corner hook of the gear loft into the
loop located on the ceiling of the tent.
15
attaching the rainfly
13
12
13
