NAPCO IQ PROFILER -, Руководство по установке

Страница: 9 / 16

I
nstall
Q
uick Corner Mounting Instructions
The IQ Profiler incorporates a patented
I
nstall
Q
uick
Corner Mounting feature which allows quick corner
mounting on standard sheet rock (drywall) surfaces.
1 Firmly hold the base of the housing against the corner of the
wall in the location in which it is to be mounted.
2 Insert a large bladed screwdriver into the Install Quick corner
mounting slot and twist clockwise approximately 45 degrees
(1/8 turn). The unit has a built in stop which will prevent over
turn. The 2 Install Quick mounting pins will project from each
side of the base, securing the unit to the wall.
3 Install circuit board and proceed with installation. When
installing circuit board, gently push PC Board indexing tab
outward to allow the board to rest on the shelf slots of
housing. For standard installations, align the PCBoard index
designation 1 with the dimple on index tab.
Note: The
I
nstall
Q
uick Corner Mounting method is designed for
standard sheet rock walls. For corner mounting on harder wall
surfaces, such as plaster or brick, push through the standard
corner mount holes and use the supplied screws to secure the
unit.
Caution: Use care not to project
the mounting pins while holding
the base in your hand. The pins
will pierce the skin causing injury.
The base must be held against
wall before projecting pins
Top View
9