11
F I R E P R O T E C T I O N
(Applicable only where local ordinance permits use of this alarm control panel for fire protection).
Fire-Zone Alarm
If a fire is detected, the FIRE icon will flash with the zone number, and the keypad sounder
will pulse.
•
If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire
Department from an outside phone.
•
If there is no evidence of a fire, enter your code and press
J
to silence the alarm.
•
Check the smoke detector(s). If a smoke detector tripped, its red alarm indicator light
will be on.
•
After the alarm condition is corrected (thermostat cooled down; smoke cleared from
detector; etc.), pressing
C
again will reset the keypad within about 10 seconds.
F
ire-Zone Trouble
•
The system is constantly monitoring the Fire Zone(s) to insure they are in good working
order.
•
If a problem on a Fire Zone is detected, a system trouble E41 will display, followed by the
number of the Fire Zone in trouble. The sounder will activate, the RESET and TROU-
BLE icon will come on and the FIRE icon will blink.
•
Press the
C
button to silence the sounder. Call for service immediately!
Note:
Trouble Error Code E41 will only display for the GEM-P1664/P1632 & P816
control panels.
CHIME
FIRE
08
08
RESET
FIRE
TROUBLE
