background image

of 6

7/17/99

WI988

4

 PHASTLink Cable Information

This section contains information that you will need to make PHASTLink cables, plus general information on
connecting PHASTLink devices.

PHASTLink cables are used to connect all PHASTLink-compatible devices, including keypads, dimmers, J-box IR
devices, amplifiers, audio switches, etc.

PHASTLink uses a standard 10Base-T connection (i.e. Category 5 wire and RJ-45 connectors). The wire should be
connected in the standard manner, as shown in the following figure. If  a consistent color code is used, wiring
problems will be minimized.

Pin #

Wire Color

Polarity

Function

1

White/Green

+

Transmit

2

Green

Transmit

3

White/Orange

Mic

4

Blue

Ground

5

White/Blue

+

12VDC

6

Orange

+

Mic

7

White/Brown

+

Receive

8

Brown

Receive

It is important that the correct pairing is observed. Transmit, receive, and mic need to be on twisted pairs. Splitting
pairs (e.g., using a white/green wire with a blue/white wire for transmit) will result in increased crosstalk, and may
result in bus failure or noise on the intercom.

If a PLB-CF10 cardframe is used, a 15-port
hub is built into the cardframe. The maximum
length of wire per port is 1,000 feet. Each
PHASTLink device has two RJ-45 connectors
to allow multiple devices to be daisy chained
on one PHASTLink port. Refer to the PLB-
CF10 documentation for more detailed
connection information.

The limit for each home run is 10 PHASTLink
devices. Extra hubs can be added to provide
additional ports.

Note:

Only one PHAST keypad can be used

per port, so home-run each keypad.

For optimum performance, PHAST
recommends the installation of a double 120-
ohm terminator in one of the RJ-45 jacks of
the last device (or the only device) in a chain
of PHASTLink devices.

To build a double 120-ohm terminator:

a.

Install a 120-ohm resistor (1/4-watt or larger) between pins 1 and 2 of an RJ-45 connector.

b.

Install a 120-ohm resistor (1/4-watt or larger) between pins 7 and 8 of the same RJ-45 connector.

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

RJ-45 Socket

RJ-45 Plug

Отзывы: