NAPCO Gemini GEM-DXRP3, Руководство по эксплуатации

Страница: 20 / 32

20
Your alarm specialist may have
programmed your system to be monitored
by a central station. The built-in digital
communicator can transmit emergency
signals and status reports to the central
station 24 hours a day.
Communicator Features
Abort Delay. Ask your installer which of
your zones have Abort Delay, a delay
that enables you to reset the system
before it communicates to the central
station. Your system has a SIA CP-01
required Abort Delay of 30 seconds. It
may be removed or increased up to 45
seconds (at your option) by consulting
with your installer.
Note: If an alarm
signal is cancelled during the Abort De-
lay or cancelled after the report is sent
(and an acknowledgement of the can-
cellation is received), a "
C
" will appear in
the keypad window.
Regular Burglary (Non-24-Hour) Zone
reports are aborted by disarming within
the delay period.
24 - H o ur Z o n es a nd z on es
programmed to report restores must be
restored first, then the panel armed and
disarmed, all within the delay period.
Opening and/or Closing Reporting.
Your system can notify the central station
every time it is disarmed or armed. Any or
all of up to 96 different users can each be
identified. If your system reports on arming
(Closing Report), the central station will
acknowledge arming. This will signal at the
keypad as a “ringback” beep.
Note: If the
ringback signal is not heard, call for service.
C E N T R AL S T AT I O N M O N I T O R I N G