NAPCO Gemini GEM-DXRP3, Руководство по эксплуатации

Страница: 11 / 32

11
F I R E P R O T E C T I O N
(Applicable only where local ordinance permits use of this alarm control panel for fire protection).
Fire-Zone Alarm
If a fire is detected, the FIRE/TBL light will display with the zone number and the
keypad sounder will pulse.
•
If a fire is in progress, evacuate the premises immediately! If necessary, call
the Fire Department from an outside phone.
•
If there is no evidence of a fire, enter your code and press
J
to silence the
alarm.
•
Check the smoke detector(s). If a smoke detector tripped, its red alarm
indicator light will be on.
•
After the alarm condition is corrected (thermostat cooled down; smoke cleared
from detector; etc.), pressing
C
again will reset the keypad within about
10 seconds.
F
ire-Zone Trouble
•
The system is constantly monitoring the Fire Zone(s) to insure they are in good
working order.
•
If a problem on a Fire Zone is detected, a system trouble E41 will display,
followed by the number of the Fire Zone in trouble. The sounder will activate, the
SYS TBL light will come on and the FIRE/TBL light will blink.
•
Press the
C
button to silence the sounder. Call for service immediately!
NN
INTERIOR BYPASS FIRE/TBL SYS TBL CHIME
NN
INTERIOR BYPASS FIRE/TBL SYS TBL
CHIME
41
INTERIOR BYPASS FIRE/TBL SYS TBL CHIME
E
INTERIOR BYPASS FIRE/TBL SYS TBL CHIME