6
AR M I N G W H E N L E AV I N G
1
Check the F-TP Touchpad indicators.
The green
READY
light should be ON-STEADY, indicating
that the system is ready to arm.
•
If the green
READY
light is BLINKING, this indicates that a zone is faulted. The
READY
light is blinking out the zone
number of the open zone. Count the flashes and look at your zone list to see which zone is open and secure it (close
the door or window, etc.). If you cannot immediately secure the zone, it may be bypassed (see page 7).
•
If the green
READY
light is OFF, another monitored deadbolt is not locked. All other monitored deadbolts must be
locked before the system can be armed. Go to the other deadbolt location and lock it.
2
Press the AWAY button.
If you change your mind after pressing AWAY, press SILENCE to clear arming.
3
Open the door and exit.
4
Lock the deadbolt
from the outside to arm the system. The F-TP Touchpad will give one chirp to
indicate the system has armed.
If the deadbolt has not been locked within 60 seconds of pressing
AWAY
, the system will revert
back to a disarmed state.
If the system detects movement inside the premises within 60 seconds of arming, it will automati-
cally revert to Stay mode, providing perimeter protection with the interior protection (motion sen-
sors) turned off. (See ARMING WHEN STAYING HOME - page 8).
If you are leaving with no other family members remaining home:
The
ARMED
indicator will begin to flash, indicating the 60 second exit delay period.
READY
ARMED
AWAY
aFreedom_F-TP_OI305.25_U...
page 6
Friday, October 28, 2005 15:56
Composite