NAPCO FREEDOM - Скачать руководство пользователя страница 27

27 

THE FOLLOWING STATEMENT IS REQUIRED BY THE FCC 

 

RADIO AND TELEVISION INTERFERENCE 

 

This equipment has been tested and found to comply with the limits for a Class-B digital device, pursuant to Part 15 of the FCC 
Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This 
equipment generates, uses and can radiate radio-frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur 
in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:  
 

• 

Reorient or relocate the receiving antenna;  

• 

Increase the separation between the equipment and the receiver; 

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; 

• 

Consult the dealer or an experienced radio/TV technician for help.   

 
You may also find the helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference 
Problems”.  This booklet is available from the U.S. Government Printing Office, Washington, DC 20402.   
 
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority 
to operate this equipment under Federal Communications Commissions rules. 
 
This device complies with part 15 of FCC Rules.  Operation is subject to the following two conditions;  (1) This device may not 
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 
undesired operation. 
 
This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numérique de la classe B est conforme à la 
norme NMB-003 du Canada.

 

aFreedom_F-TP_OI305.25_U... 

page 27

Friday, October 28, 2005 15:56 

Composite

Содержание FREEDOM -





























Отзывы: