791-5070 A
1
rev. 03/04/16
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,000 lbs.
Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-1/2"
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-7/8"
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36"
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 lbs.
MODEL # 791-5070 A
1,000 LB. CAPACITY
GEARED ENGINE STAND
• Read, study, understand & follow all instructions before
using. • User and bystanders must wear eye protection
that meets ANSI Z87.1 and OSHA standards. • Inspect
the engine stand before each use. Do not use if damaged,
altered, modified, in poor condition, or has loose or missing
components. Take corrective action before using the
engine stand. • Do not use beyond rated capacity. • Use
only on a hard level surface capable of supporting the load.
• Make sure all mounting hardware is securely tightened
and setup is stable before rotating engine. • Always use
high strength SAE Grade 8 bolts for mounting engine to
mounting head fingers. • Make sure widest set of mounting
head fingers are nearest the ground when mounting engine
to stand. • Assure the load is centered, balanced and
secured to the mounting head and fingers. The engine's
weight should be balanced within 1" of the mounting
head's rotational axis. • Adequately support the vehicle
before starting repairs. • Never loosen mounting head
bolts or engine mounting bolts unless engine is supported
by a crane or hoist. • Only attachments and/or adapters
supplied by NAPA shall be used. • Do not use stand or dolly
to transport engine. •
Do not crawl under engine or place
any part of your body under engine at any time.
• Refer
to engine manufacturer's service manual for proper lifting
points, mounting points and bolt sizes. Mounting bolts
should be torque at appropriate amount to maintain load.
• Do not use (or modify) this product for any other purpose
than that for which it was designed without consulting the
manufacturer's authorized representative. • This product
contains chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm.
Wash hands thoroughly after handling.
• Failure to heed
these warnings may result in serious or fatal personal injury
and/or property damage.
SPECIFICATIONS
BEFORE USING THIS DEVICE, READ THIS
MANUAL COMPLETELY AND THOROUGHLY,
UNDERSTAND ITS OPERATING
PROCEDURES, SAFETY WARNINGS AND
MAINTENANCE REQUIREMENTS.
It is the responsibility of the device owner to make sure all personnel
read this manual prior to using the device. It is also the responsibility
of the device owner to keep this manual intact and in a convenient
location for all to see and read. If the manual or product labels are lost
or not legible, contact NAPA for replacements. If the operator is not
fluent in English, the product and safety instructions shall be read to
and discussed with the operator in the operator's native language by
the purchaser/owner or his designee, making sure that the operator
comprehends its contents.
WARNING
