14
Plug the USB Cable into the charger.
Plug the USB plug into a standard
230V~50Hz mains socket outlet.
The green LED light will illuminate on the
units control panel to show that it is
receiving power.
The machine is now ready to use.
oPeratIon
locKed Mode
The Self-Levelling 360° Line Laser can
be used to project laser beams at any
angle desired, such as when projecting a
line for stairs or a railing. This mode
produces the best results when the tool
is mounted on a tripod.
Slide the Lock/Unlock switch to the
“LOCK” position.
Short press the On/Off button to turn the
laser level ON.
The unit will emit a horizontal laser line, a
side vertical laser line and a front vertical
laser line. The laser line will flash every 5
seconds.
The laser lines can be powered one at a
time or all at the same time.
Cycle through the available modes by
short pressing the On/Off button.
Cycle 1: 1 horizontal laser plane and 2
vertical laser planes.
Cycle 2: 1 horizontal laser plane and
1 vertical laser plane (side).
Cycle 3: 1 horizontal laser plane and
1 vertical laser plane (front).
Cycle 4: 2 vertical laser planes.
Cycle 5: 1 horizontal laser plane.
Cycle 6: 1 vertical laser plane (side).
Cycle 7: 1 vertical laser plane (front).
Long press the On/Off button to turn the
laser level OFF.
Self-leVellIng Mode
With the laser off, Position the laser level
in a suitable place (level firm base or
tripod/stand).
Slide the Lock/Unlock switch to the
“UNLOCK” position.
Short press the On/Off button to turn the
laser level ON.
The unit will emit a horizontal laser line, a
side vertical laser line and a front vertical
laser line.
Do not point the laser beam at
persons or animals and do not look into
the laser beam yourself, not even from a
long distance.
After switching on, the levelling
function automatically compensates
irregularities within the self-levelling
range of ±4º. The levelling is finished as
soon as the laser beams no longer move.
If the measuring tool surface deviates
more than 4º from the horizontal plane,
then the automatic levelling function is
not possible and the laser beams will
flash. The lines will flash continually.
Содержание 502129309
