Nanoxia DEEP SILENCE 2, Руководство пользователя

Страница: 13 / 21

EN
Opti onal case fans:
Note: Additi onal case fans in the side panel and the bott om of the Deep Silence 2 should be
mounted so that cooler air is introduced into the case. If you install case fans in the mounti ng
bracket, those should support the movement of air from front to back.
Case fans installed at the top of the case should exhaust air out of the case.
We recommend the use of the 120 or 140 mm Nanoxia Deep Silence fans, available separately.
These are technically and visually equivalent to the factory-installed case fans and will work in
perfect harmony with the built-in fan control of your case.
Additi onal fans in the mounti ng bracket behind the HDD cage:
If you want to mount additi onal fans inside the case, for example to opti mize disk venti lati on,
you can use the specially developed mounti ng bracket that is screwed to the hard drive cage.
Please fi rst remove the screws, as shown on picture 6C
.
On the back of the disk cage the frame is
only hooked - here it is suffi cient to loosen
the screws slightly ( picture 6D ).
Hold the fan from the inside to the bracket
and screw it in from the outside. Then hook
the mounti ng bracket with the fans back in
the cage and att ach it with the three screws.
picture 6C
picture 6D
12