3 Technical details and pin assignment
3.4.3 X3 (STS)
−
digital output (status output)
Type: DEGSON Electronics 15EDGRC-3.5-03P-14-00AH
Mating connector (included in scope of delivery): DEGSON Electronics 15EDGKN-3.5-03P-14-00AH or
equivalent
X3
1
Pin
Function
Note
Connection for the external voltage supply of the output
1
V
out_ext
max. 36 V
digital output, open-drain
2
D
out
max. 36 V/ 1 A, short circuit proof up to 36V
3
GND
Ground
The output is implemented as "open drain". Hence, an external voltage supply as shown in the following
figure is always necessary.
Vo
ut
_e
xt
D
ou
t
Supply voltage
Output signal
Status Output
The output signals the state of the brake chopper: as long as the output is HIGH ((D
out
=V
out_ext
), the supply
voltage (U
p
) is avaiable and no errors have occured. If the output turns LOW (D
out
=GND), an error has
occured. The red LED signals the exact error number,
3.5 LED signaling
The brake chopper is equipped with three LEDs, L1 PWR (green), L2 STS (yellow) and L3 ERR (red).
Version: 1.2.0
12
