Document # 720003-0000
December 2015
21
SPILL PROOF / SPILL PROOF CUTS
Service Manual
Testing the Printer
This test can be used to verify the correct operation of the printer. The test prints a
resident ticket listing the current printer settings. This ticket can also be used to verify the
printing quality.
Figure 17: Status ticket
To print the test ticket, power-on the printer while pressing and holding the Paper Feed
Button for approximately 5 seconds. A test ticket similar to the one shown above will be
printed. Pressing the button again will result in blank tickets.
Model: SPILL
PROOF
CUTS
Firmware: SPC-2.89Z
Protocol: EPSON
570
COMMUNICATION
Interface:
Serial
Baud:
9600
Data Bits:
8
Parity:
NONE
Handshaking:
PRT+RTS
Print Mode:
Line
Aux Port:
Disabled
PRINT CONTROL
Print Method:
No HPQ
Speed:
150 mm/sec
Black Bar Index:
Disabled
No HPQ Burn time
240 us
Cutter PWM:
80 %
Motor Current:
3
Real-Time Comment
Enabled
Validation Bit:
After Barcode
PRINTER ENVIRONMENT CONDITIONS
Voltage:
24.2 Volts
Temperature:
23 Celcius
SYSTEM RESOURCES
FLASH: Used=00000
RAM: Used=00000
Free=65535
Free=65535
LIBRARY INVENTORY
(STANDARD)
Templates:
0,1,2,3,4,5,6,7,8,9,A,B,F,
Regions:
1,2,3,4,5,6,7,8,h,9,A,B,C,
D,E,F,G,I,J,K,L,N,O,P,Q,R,
S,T,U,Z,X,a,b,c,d,e,f,g,i,
j,k,l,m,n,o,p,q,r,s,t,u,v,w
Fonts:
0,1,2,3,4,5,7,8,9,A,B,E,P
Graphics:
None
MANUFACTURING INFORMATION
Printer ID:
SPC0207
Date Code:
20080505
A to D:
03d4,01fe,0208,03c6
*S 0 SPC-2.89Z @ @ @ H @ P *
