Nanometrics RM-4, Руководство пользователя

Страница: 15 / 60

Front Panel
The status of the RM-4 is indicated by a single tricolour LED. The front panel graphic overlay
includes the Nanometrics logo, the product name (RM-4 Bridge Multiplexer), and a transparent
section for the status LED, as shown in the figure below.
Figure 1: RM-4 Front Panel
Rear Panel
The rear panel of the RM-4 is used to make all of the necessary connections to the unit.
Connections include Ethernet, GPS, Power, and Serial Ports 1 to 8, as shown in the figure below.
Figure 2: RM-4 Rear Panel
Connector Pinouts
Cables should not normally need to be assembled by the user. However, the pinouts of all
connectors are given in Appendix B.
The Ethernet and Serial Port connectors are standard RJ-45 type. The pinouts have been chosen
such that the LAN may be plugged in to any of the serial ports and vice versa, without damaging
the RM-4.
Power is provided through a 5-pin DIN connector, and the GPS antenna cable is connected via an
SMA jack.
RM-4 Manual 9
4 - User Guide