26
Introduction
Trouble shooting
Trouble
shooting
Problem
Description
Solution
ADAM-SCC2 does
not power up
•
No power from outlet.
•
Bad power cord.
•
Check power source.
•
Replace.
Inaccurate result
•
Cell number may be out of
range.
•
SCC-Solution has expired.
• Too high clumped cells.
•
Adjust the number of cells
between 0.05 ~ 1.15 x 10
6
cells/mL (refer to page 4).
•
Check the expired date.
•
Try again after vortexing
the cells.
When error
message is shown
(For information on
each error message,
see page 17)
•
When there are too many
frames with errors
(Error message: E)
•
Check the suspension of
cells if all cells are fully
dissociated into single cells.
•
If contaminants except
cells are found, prepare
sample again.
•
Error frame
•
Pre
pare sample again
except contamination.