ADAM-MC (Automated Cell Counter) ©2008 NanoEntek, Inc.
5
Safety information
Safety
precautions
1. Always ensure that the power supply input voltage matches
the voltage available in your location.
2. For operation environment, See page 12.
3. This machine is air-cooled so its surfaces become hot during
operation. When installing it, leave a space of more than 10 cm
(4 inches) around it.
4. Never insert metallic objects into the air vents of the instrument
as this could result in electrical shock, personal injury and
equipment damage.
5. Always set the main switch on the power supply unit to off before
connecting the power cord to the wall outlet.
6. Always ensure that the grounding terminal of the instrument
and that of the wall outlet are properly connected. The power
cord should be connected to a grounded, 3-conductor power
outlet.
7. To avoid potential shock hazard, make sure that the power
cord is properly grounded.
8. Do not position the equipment in a position that is difficult to
disconnect the equipment.
9. Be sure to set the main switch to off, unplug the power cord
and lock the stage before moving.
10. If the instrument is broken or dropped, disconnect the cord
and contact an authorized service person. Do not disassemble
the instrument.
11. Use only authorized accessories.
12. Use this equipment only as specified in this manual and as
specified in any documentation associated with its components.
Any use of the equipment in an unspecified manner is strongly
discouraged and may result in damage or injury as cautioned
by signed warnings.
