13
5.4 CONNECTING TO POWER
Only use the included 12/24V Power Adaptor to power the Dash Camera.
• Once the Dash Camera is securely installed on your vehicle’s windscreen, plug the
12/24V power adaptor into your vehicle’s cigarette lighter.
• Run the cable along your vehicle’s console and windscreen and plug the USB Micro plug
into the Dash Camera. (See image on page 12).
6.0 POWERING THE DASH CAMERA ON / OFF
6.1 AUTO POWER ON/OFF
When the Dash Camera is correctly installed and connected to your vehicle’s 12/24V power
supply, the Dash Camera will automatically power up and start recording when the vehicle
accessories are activated.
6.2 MANUAL POWER ON
Hold the Power Button on the side of the Dash Camera until the NanoCam Plus start-up
screen appears.
6.3 POWER OFF
Ensure the Dash Camera has stopped recording and press the Power Button. Wait 10
seconds before turning it back on.
