background image

5

Caution

   Ensure you are using your Car DVR within your countries’ road laws. Please make sure you are familiar with your local road legislation 

before use. 

   Avoid leaving your Car DVR in direct sunlight for extended periods of time in an unventilated space.

   Please set time and date before you use this device to record.

   The notifications given by the Car DVR are suggestions only, please drive to the actual conditions.

   The system is to be used only for non-commercial use, within the limits permitted by the relevant laws

   Avoid using the Car DVR in the vicinity of any devices that emit radio interference (eg. Microwave Ovens). 

   It is considered normal operation for the Car DVR to get warm during use.

Battery Warning

  Always charge the Car DVR using the provided charger. Improper charging of the Car DVR may result in failure of the internal battery. 

  Never dismantle the Car DVR or expose the internal battery. 

  Do not dispose of the Car DVR in fire.

  Dispose of the Car DVR observing local regulations being mindful of the internal battery.

  Do not attempt to replace or expose the internal battery.

Notes on Installation

1.

  

It is advised that the Car DVR is installed near the rear view mirror, at the top centre of the windshield for optimal operation.

2.

  Make sure that the lens is within the range of the windscreen wiper to ensure a clear view when it rains.

3.

  Do not touch the lens with your fingers. Finger prints left on the lens will result in unclear videos or photos. If photos or videos are blurred, 

please clean the lens gently with a microfibre cloth.

4.

 Only use the included charging cable to power the Car DVR.

Содержание NCP-DVR720





























Отзывы: