Instruction manual
Filtrating half-mask BreaSAFE
®
CLASSIC FFP3 NR is
suitable for protection of respiratory organs against
particles. Minimum capture rate of solid (average
particle size 0.6 µm) or liquid (average particle size
0.4 µm) air-borne particles is 99%.
Filtering half-mask BreaSAFE
®
CLASSIC FFP3 NR is
intended for protection of respiratory organs of the
user against particles, bacteria and viruses.
The maximum time of usability / lifetime of the
respirator cannot be precisely determined – this
always depends on the conditions under which the
respirator is used. The respirator must not be
immersed in water nor in any other liquid. The
respirator must not be used in explosive atmosphere.
The respirator is intended for single-use (NR
marking) if used in polluted (dusty or very dusty)
environments. The respirator is not to be cleaned.
Respirator should not be used for more than one
shift.
Read the instruction manual before you
wear the respirator, make sure that the
respirator is not damaged and follow the
instructions when placing the respirator
on your face.
Do not use the respirator if:
•
harmful particles have penetrated the respirator
and contamination, foul odor or another sign of
penetration of pollutants into the respirator has
been discovered,
•
breathing resistance of the respirator has rapidly
increased.
The respirator does not protect against gases and in
air with oxygen concentration of less than 17 %. It also
must not be used for protection in environments
where composition and concentration of pollutants
is not known.
The respirator must be stored in dry
and clean environment
Keep at temperatures
of -5 °C to +40 °C.
Sealing requirements will probably not
be met if the user has beard in the area
of the sealing line of the respirator.
Instructions prior to use
1. Wash your hands thoroughly.
2. Take out and visually check the respirator and its compo-
nents. If you see damaged or missing parts (nose clip, nose
sealing, plastic strap holders, elastic straps), color changes or
any other visible damage - do not use the respirator.
3. Take the respirator and place it on your face (the respirator
has a nose part equipped with a sealing strip and clip in its
upper part).
4. Pull the fastening straps over your head.
5. Check proper sealing of the respirator: Inhale forcefully. If you
detect leakage of air between the respirator and your face, you
will achieve better sealing by:
•
moving the respirator on your face to more suitable
position,
•
moving the fastening straps on your head to more
suitable position,
•
shaping the nose clip to ensure better adhesion to the
nose.
GÉPTESZT Kft. (Notified Body No. 2233) (Jablonka St. 79, 1037
Budapest, Hungary), performed the EU type examination
(Module B, C2) and issued the EU type examination certificate
No.: TD11/GT206/211/2101/E/2233 in compliance with EN
149:2001+A1:2009 Respiratory Protective devices – Filtering half
masks to protect against particles – Requirements, testing,
marking.
EU Declaration of conformity (CE):
www.nano4fibers.com/declaration-of-conformity-ce
Shelf life:
60 months
Manufacturer:
NANO4FIBERS FACTORY s.r.o.
CLASSIC FFP3 NR
Nanofiber respirator
BreaSAFE
®
CLASSIC FFP3 NR
valve-free filtrating half-mask
for maximum protection
T:
+420 565 552 610
E:
www.nano4fibers.com
NANO4FIBERS
FACTORY s.r.o.
IČO: 09182560
DIČ: CZ09182560
Headquarters
Žižkova 2759
413 01 Roudnice n/L
Czech Republic
All about
BreaSAFE®
products:
www.nano4fibers.com/
breasafe
