Nanni T4.205 Скачать руководство пользователя страница 26

Страница: 26 / 67

Before starting

WARNING

Put all the protective covers back
before starting the engine.

CAUTION



Open the sea cock (if equip-

ped) before starting the engine.
The raw water pump impeller will
be damaged if it runs dry even
for few seconds, and may lead to
engine overheating.

Perform all of the following opera-
tions before starting the engine:

Open sea cock (if fitted). Prime

the raw water system if neces-
sary.

Start the compartment fan (if

fitted) for at least five minutes.
Otherwise, open the hold.

Check that there is sufficient

fuel.

Move the control lever to the

neutral position.

Open fuel cock, prime the sys-

tem if necessary.

Check the engine and trans-

mission oil level and fill with the
recommended oil if necessary.

Check the coolant level, top up

if necessary.

Check the control cables,

grease the connections if neces-
sary.

Check there are no fuel, oil,

coolant or water leaks.

10.

Check the alternator belt.

11.

Switch ON the main switch.

12.

Lower the drive (Stern Drive

version only).



PERATION

Содержание T4.205




































































Результаты поиска

Содержание T4.205

Отзывы:

Похожие инструкции для T4.205

Бренды по названию

Популярные бренды

Nanni T4.205, Руководство оператора

Результаты поиска

Содержание T4.205

Отзывы:

Похожие инструкции для T4.205

Бренды по названию

Популярные бренды