Nanni QLS 65T, Руководство пользователя

Страница: 76 / 80

76
RESTARTING THE ENGINE
1. Perform external cleaning of the engine and control
its condition.
2. Drain and change the engine and transmission oil.
3.
Change oil filters.
4. Check the condition of the raw water pump impeller.
Change it if needed. Install the impeller.
5. Remove cloths and tapes from openings. Install the
air filter.
6. Close/Tighten all plugs and drain cocks.
7. Check the condition of hoses and clamps.
8.
Check the sacrificial anodes (when fitted).
9. Fill the engine with coolant and level up. Top up if
necessary.
10. Connect fully charged batteries.
11. Check the connection cables and their condition.
12. Check belts. Adjust the tension.
13. Bleed the fuel system.
Once ready :
14. Open the sea cock and prime the seawater system
(if fitted).
15. Start the engine. Check for leaks and correct opera-
tion.
18. Ckeck electric power output.
BATTERY
When storing the engine, adjust the battery electrolyte
level and store it in a dry place at room temperature.
Recharge the battery as often as possible to extend its
service life.
Do not left the battery unattended for a long period of
time: it will get into deep discharge (around 7-8 Volts). In
such a situation, the battery will not recover.
ALTERNATOR
During long term storage, the alternator must not be
removed from the engine. Inlet and outlet ventilation
slots should be protected to avoid moist to seat inside
the alternator.
S10 STORAGE