6
3. When setting the address code, press the "+" to increase the address code number and press "-" to decrease the
address code number. The display will shows the address code number of the fixture in the range of A.001···A.512.
These two buttons support click or long press.
4. When stop using the fixture, turn off the switch.
1. Please open the package to check if it is damaged due to transportation after receiving the light. In case of
damaged cased by transportation, please do not use the light and contact the dealer or manufacturer as soon as
possible.
2. Do not use a power cord with damaged insulation. Do not unplug hard or drag the power cord directly.
3. Make sure that the power supply voltage used matches the voltage specified by the light before installation.
4. When not using or cleaning the light, please turn it off.
5. Keep the light safely stored and away from children.
Safety Precautions
1. When the light is on, don't look direct at the emitter.
2. Don't place objects on the light emitter or allow liquid to flow inside the fixture or the emitter.
3. Don't place fixture near flammable substances like alcohol or gasoline.
4. When cleaning the fixture, please wipe off debris or dirt using cloth and only dampen with water or light cleanser.
5. The light should be safety operated where it won't be at risk of getting wet or under extreme temperatures. Please
make sure the ventilation is not obstructed.
6. Do not repair the fixture yourself. Repair professionals, please adhere the user manual while troubleshooting.
7. For optimal cooling of the fixture, the vents should not be covered whening using, or will damage the equipment.
When using the fixture for a long time, the temperature of the fixture is high, please pay attention to anti-scalding.
Notice
