N&W Global Vending Canto Plus Instant, Установка, эксплуатация и обслуживание

Страница: 53 / 68

© by N&W GLOBAL VENDING S.p.A.
47
07 - 2010 3375 - 01
board fuNCtIoN
CoNfIguratIoN of ElECtroNIC
boards
the electronic boards are designed to be used on sev-
eral equipment models.
If replaced or in order to change the machine perform-
ance, it will be necessary to check the configuration of
the boards and to download the corresponding software.
s
ofTWarE upDaTE
the machine is equipped with Flash EPRoM’s that can
be electrically rewritten.
Use a proper program and system (personal computer
or hand-held computer) to rewrite the machine manage -
ment software without replacing the EPRoM’s.
p
rE
-
programmiNg
after having loaded the software, use the new board to
define which type of keyboard to use before initialising or
programming the various parameters.
to access the pre-programming function (keyboard
choice), hold down the pre-programming button (see fig.
33) while powering on the machine.
the display will show the “pre-programming” message
flashing on and off. Press button (9) quickly to scroll the
list of all available keyboards.
Hold down button (9) until you hear a sound signal. The
keyboard on the display will be stored and you can start
initialising.
Fig. 31
Secondary transformer fuse 1-
Primary transformer fuse 2-
Radio interference suppressor 3-
Permanently live socket 4-
Mains fuse 5-
Transformer 6-
Instant boiler heating activation relay 7-
Actuation board 8-