RF30
© 2010 All rights reserved Printed in China
http://www.namsung.com
Initial setup
1.
Turn on the power to the radio and RF30 receiver. A blue LED should be visible
through the top of the receiver.
2.
Link the RF30 remote to the receiver by pressing and holding the MUTE button
on the RF30 remote for 5 seconds, while the remote is within 3 feet of the
receiver. The LED on the receiver will flash to confirm the connection. Note :
this step must be repeated if the battery is remove from the RF30 remote.
3.
Mount the RF30 receiver using cable ties or screws. The receiver should be
mounted away from areas that may be splashed by water.
