LD2 (green) – state of GSM/GPRS
(*) technological centre
LD3 (yellow) – breakdown of communicator
(*) only when FAS is activated in configuration
(**) only for communicators GTbz/GTbzxxx
If a number of breakdowns occur at one time, they are
shown in sequence with 1 second gaps between each
breakdown
LD4 (red) – data transmission
(*) technological centre
RESET button
The RESET button serves to carry out the initiation of the
status of the REGGAE communicator Pressing the RESET
button for a longer time (longer than 1s) initiates the
restart of the communicator During this restart, initiation
of all communication channels is carried out Restart of
the communicator does not cause the deletion of news
and occurences tables and corresponds to the turning on
of supply to the communicator
Pressing the RESET button for a short time starts the in-
dication of the signal strength of GSM/GPRS on the blue
LED LD1 This indication is active for 1 minute After this
time, the blue LED LD1 will again indicate the status of
the telephone communication wilth the AS
Indication of the status of the communicator - LED
lights
LED LD1 to LD4 on the circuit board of the REGGAE GT
communicator serve to indicate the present state of the
REGGAE communicator
The meaning of the LED indication lights are as follows:
LD1 (blue) – state of telephone communication
with AS
LD1 (blue) – strength of GSM/GPRS signal
(1 minute after a short press of the RESET button)
LD1 (blue)
Not shining
Shining
Flashing
Turns off for 0 5 s
Meaning
Idle-circuit state
Line is being answered
or PSTN disconnected
Receiving data
Confirmation of data receipt
U
S
E
R
M
A
N
U
A
L
REGGAE GT/GTbz
Communicator for GSM (GPRS/SMS) transmission
www.namsystem.com
LD1 (blue)
Not shining
Flashes 1×
Flashes 2×
Flashes 3×
Flashes 5×
Meaning
Idle-circuit state
Excellent signal (>75 %)
Good signal (>50 %)
Bad signal (>25 %)
Very bad signal (<25 %)
LD2 (green)
Not shining
Flashes 1×
Flashes 2×
Flashing quickly
Shining
Meaning
Serious breakdown of GSM/GPRS
No GSM signal
Logged in GSM
Scanning of GSM network
Logged in TC (*)
LD2 (green)
Not shining
Short flashes
Long flashes (*)
Flashes 2× (**)
Flashes 3× (**)
Flashes 5×
Meaning
No breakdown
Breakdown (disconnected) PSTN
Communication problem at RS2
Outage of 230 VAC network
Defective/missing accumulator
Communicator without
configuration
LD4 (red)
Not shining
Flashing
Shining
Meaning
Idle-circuit state
Transmitting data to ARC
Not connected to ARC or to TC (*)
9
