NAL A3LA-R, Руководство пользователя

Страница: 37 / 158

A3LA-R User Guide Version A
Document Number: 451-93156-001A 37 of 158
B.7 V
N
– V
ERBOSE
M
ODE
Set the response format of the A3LA-R, which may be either numeric or textual.
0 Numeric responses
1 Textual responses (default)
B.8 W
N
– E
RROR
C
ORRECTION
M
ESSAGE
C
ONTROL
Set the format of the CONNECT messages.
0 Upon connection, the A3LA-R reports the DTE speed (default)
1 Upon connection, the A3LA-R reports the line speed, the error correction
protocol and the DTE speed in that order
2 Upon connection, the A3LA-R reports its data port speed
B.9 Z
N
– S
OFT
R
ESET
Reset the A3LA-R to a user-stored configuration.
0 Restores user configuration 0
1 Restores user configuration 1
B.10 &C
N
– DCD O
PTION
Select how the A3LA-R controls the DCD behavior.
0 DCD is forced on at all times
1 DCD indicates the connection status (default)
B.11 &D
N
– DTR O
PTION
Set the A3LA-R reaction to DTR signal.
0 DTR is ignored in all modes. A DTR signal input is not needed when set to
&D0.
For all other &Dn settings, the following applies.
DTR must be ON during on-hook command mode. If DTR transitions from ON to OFF
during on-hook command mode, operation will be locked after approximately 10
seconds. On-hook command mode operation will resume when DTR is restored ON.