manualshive.com logo in svg

nal von minden Reactif Touch, Руководство пользователя, Страница: 30 / 88

Поделиться
Скачать
nal von minden Reactif Touch Скачать руководство пользователя страница 30

26

nal von minden GmbH · Manual

Reacti f Touch

On the 

Results screen

, press  

  to conti nue or to edit the 

Work List

. 

If an error occurs during the test, a prompt screen will appear, as seen below:

Press  

  to keep unfi nished tests in the 

Work List

 and return to the 

Test Preparati -

on screen

. Press  

  to erase unfi nished tests from the 

Work List

 and return to the 

Test Preparati on screen

 to conti nue with the next test in the 

Work List

. 

If the analyzer has been set up to fl ag a confi rmatory test for one or more parameters, 

the 

Edit Result screen

 is displayed when the result meets the 

Abnormal setti  ng value

. 

The results can be changed if desired. The changed results will be marked on the 

Results 

screen

. If the analyzer has been set up to fl ag a microscopy test, the results will also be 

marked on the 

Results screen

. 

Aft er all tests on the

 Work List

 are completed, you can exit the 

Work List 

and review the 

results following the steps of

 Secti on 8 Records Review: Review All Data

.

Conti nuous Test ON

Conti nuous Test

 mode allows the user to accelerate the test speed to up to 120 tests per 

hour, but requires expert operati onal skills. Since users commonly make mistakes during 
operati on and since the functi on of reducing the interference of urine color does not 

work in

 Conti nuous Test

 mode, it is generally NOT recommend for the user to test in the 

Conti nuous Test

 mode on the Reacti f Touch Urine Analyzer.

 Note:  

Conti nuous Test 

only works when the 

Work List 

is 

ON

. 

Содержание Reactif Touch

























































































Отзывы:

Нет отзывов