nal von minden Reactif Touch Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 88

nal von minden Reactif Touch Скачать руководство пользователя страница 13

9

Secti on 4 Touchscreen LCD Navigati on

Analyzer Conﬁ gurati on is performed by using the LCD touchscreen. Selected icons, which
are shown below, and text can be pressed with the ﬁ nger to change setti ngs or to enter
or exit screens. If the analyzer does not respond, press the symbol or text for a slightly
longer ti me or with slightly higher pressure to acti vate the touchscreen area. If the ana-
lyzer sti ll does not respond, refer to

Secti on 11 Troubleshooti ng

.

Screens

The touchscreen serves as a guide for how to operate the Reacti f Touch Analyzer. The
screen will display messages, instructi ons and opti ons, which the user can respond to by
pressing the appropriate selecti on on the screen.

The ﬁ rst main screen is the

initi al screen

. It displays the operator’s name, ti me/date,

the strip quanti ty that can be used, power source used, and connecti vity method. This
screen indicates the instrument is ready to perform any of the four acti ons or tasks

shown below.

Each screen that follows the

initi al screen

has an icon, ti tle bar, and touch-sensiti ve

acti ve areas. In some cases, the screen will also display instructi ons, messages, or error
messages. The icon indicates the main secti on working (1 of the 4 secti ons listed on

Note:

The screen on the left is the

initi al screen

for analyzers

with the Strip Lockout

and the screen on the right is the

initi al screen

for analyzers

without the Strip

Lockout

.

The screen will not display the

strip quanti ty

if Strip Lockout is not included on

the analyzer.

«
...
11
12
13
14
15
...
»

Содержание Reactif Touch

























































































Отзывы:

Нет отзывов