NAL RESEARCH CORPORATION A3LA-RM Скачать руководство пользователя страница 21

Страница: 21 / 114

NAL Research Corporation (451-93156-002A)

A3LA-RM responses are NOT sent to the DTE

A.8.7 Vn – Verbose Mode

Set the response format of the A3LA-RM, which may be either numeric or textual.

Numeric responses

Textual responses (default)

A.8.8 Wn – Error Correction Message Control

Set the format of the CONNECT messages.

Upon connection, the A3LA-RM reports the DTE speed (default)

Upon connection, the A3LA-RM reports the line speed, the error correction protocol
and the DTE speed in that order

Upon connection, the A3LA-RM reports its data port speed

A.8.9 Zn – Soft Reset

Reset the A3LA-RM to a user-stored configuration.

Restores user configuration 0

Restores user configuration 1

A.8.10 &Cn – DCD Option

Select how the A3LA-RM controls the DCD behavior. DCD always indicates the connection
status.

No action, compatibility only.
Allowed values for n are 0 and 1.

A.8.11 &Dn – DTR Option

Set the A3LA-RM reaction to DTR signal when auto dialing is disabled (see the ^AD command).

DTR is ignored. A DTR signal input is not needed when set to &D0.

If DTR transitions from ON to OFF during a data call and is not restored ON within
approximately 10 seconds, the call will be dropped.

If DTR transitions from ON to OFF during a data call, the call will be dropped
(default).

A.8.12 &Fn – Restore Factory Settings

Recall factory defaults.

Recall factory default 0

A.8.13 &Kn – Flow Control

Select the flow control method between the A3LA-RM and DTE.

Disables flow control

Enables RTS/CTS flow control (default)

A.8.14 &Mn – Asynchronous/Synchronous Mode

Select the DTR operating mode.

Selects normal asynchronous operation (default). (See &Qn)

A.8.15 &Qn – Sync/Async Mode

Содержание A3LA-RM



















































































































Результаты поиска

Содержание A3LA-RM

Отзывы:

NAL RESEARCH CORPORATION A3LA-RM, Общее описание устройства, Страница: 21 / 114

Результаты поиска

Содержание A3LA-RM

Отзывы: