NAL RESEARCH CORPORATION 9602-LP, Руководство пользователя

Страница: 21 / 42

NAL Research Corporation (TN2014-001-V1.4.5) 21
5.5 Tracking Settings
The Tracking Settings tab offers multiple settings. “Emergency Report Flood” sets how many GPS reports
will be sent out continuously when first entering Emergency Tracking. After <n> GPS reports have been sent,
the pre-programmed reporting interval will take effect. “Remote Message Format” sets format of the messages
that will be sent to the command center. “GPS Always ON” forces the GPS receiver to stay on in between
reports allowing hot-start each time the 9602-LP wakes up. “Start-Up Mode” sets the power-up mode of the
9602-LP.
The 9602-LP allows GPS reports to be saved on its non-volatile memory with “Data Log Tracking” option
turned on. When its memory is full, the oldest reports are over-written. SatTerm can be used to retrieve all
position reports at a later time through the multi-interface serial port.
When the “Block Invalid Reports” is enabled and a tracking mode is selected, reports with invalid GPS fix
will not be sent. “Test Report Flood” sets how many GPS reports will be sent out continuously when first
entering Test Tracking. After <n> GPS reports have been sent, the pre-programmed reporting interval will
take effect.
Figure 13. SatTerm Setup Window for Tracking Options.