NAKTO S02, Руководство пользователя

Страница: 4 / 24

Notice: These two special fork lock washers keep the wheel from falling
off if the axle nuts ever loosen up! Tighten the axle nuts by hand.
4. Once the lock washers are in place tighten both axle nuts with the
supplied double-open end wrench.
Notice:
Before doing the final tightening of the axle nuts, make sure the wheel is
square and true with the forks.
5. Push the black plastic nut caps onto the axle nuts.
6.Plug in the motor cable.
1. Loosen the four stem faceplate bolts with supplied Allen wrench.
Remove the stem faceplate and set aside.
Step Three: Install the handlebar