NAKTO S02, Руководство пользователя

Страница: 2 / 24

Let’s start assembling your NAKTO S02 ebike!
(Please read this entire assembly manual before assembly as it will save
you a lot of time!)
Step One: Unpack the bike
1. Pull the frame and all parts (Keys，Pedals，Front basket，
Rear basket，Manual，Front fender，Toolkit，Charger，Seat) out of
cardboard box. Separate bike from foam padding.
Cut off all zip ties with scissors while being extra careful as not to damage
the paint or cut any wires or cables.
Notice:
Keep the spare fuse in a safe place. lt is not used for assembly and will be
used for the replacement if the original fuse were damaged.
2. Ensure all the following pieces are included with the Nakto S02
Assembly Instructions: S02
Tools included: Screwdriver, Phillips & Slotted 2 in 1
Double open-end wrench, 8mm/10mm
Double open-end wrench, 13mm/15mm
Allen wrench, 3mm；Allen wrench, 4mm
Allen wrench, 5mm；Allen wrench, 6mm
Tools needed: Scissor
Bike pump
Charger Seat Toolkit
Front fender
Rear basket
Front basket
Manual
Keys Pedals