8
TIMER 1 (T1) = SANITISATION. Oxidiser, Ioniser and Pump are running.
TIMER 2 (T2) = CIRCULATION ONLY. Cell is in OFF mode. Pump only is
running. Cell is ON for the final hour of T2.
Choose Outdoor or Indoor Pool.
STEP 5
When selecting indoor pools during startup the unit will automatically reduce
the OXI output to 50% to avoid chlorine levels increasing. Once the startup
process is complete, the OXI output will automatically default back to 100%
*
.
*Consider reducing OXI output ongoing for indoor pools depending on usage.
Did you know?
As variable speed pumps need longer run times, this screen allows you to
adjust Timer 2* to extend run times ensuring adequate circulation.
* Note that T2 is for circulation only.
Choose Variable or Single Speed Pump.
STEP 6
STARTUP COMPLETE
The system will run for a given period of time based on the pool size and then
switch to AUTO mode with the dual timers set accordingly. If the option of
copper was selected as YES, the system will go direct to AUTO mode with the
correct timers set.
If you are retrofitting an existing pool that has high salt levels, the unit will
automatically reduce the OXI output to compensate for the high conductivity
ensuring correct output levels. Once the startup process is complete, the OXI
output will go back to 100%.
Did you know?
