GB
Your appliance at a glance/Opertion
4
Your appliance at a glance
Operation
Installation and commissioning
Attach a sufficiently long and strong rope to the handle before first use. The pump is submerged
into the liquid on this holding rope and can also be carried with it as well as with the handle.
Connect pressure pipe
For occasional use, use a suitable water hose.
The use of rigid pipes with a non-return valve is recommended for use at a fixed location. This
prevents return flow of the liquid when switching off.
(Threaded connection:
?
Technical data – p. 8)
– Screw pressure line onto the pressure connection.
All threaded connections must be sealed with thread sealing tape (e. g. Teflon® tape).
– When using a hose, screw a suitable hose adapter onto the pressure connection.
– Push the hose firmly onto the hose adapter and secure with a hose clamp.
Installation
The appliance needs an area of at least 50 × 50 cm .
The appliance can be submerged under water up to the submerged operating depth mentioned
in the technical data.
Install the appliance so that the suction openings cannot be blocked by foreign bodies (place the
appliance on a firm, even base if necessary).
Ensure that the appliance is stable.
Note:
In the case of continuous use of the pump with the rope, the condition of the rope must
be checked regularly as it can decay and break over time.
1. Carrying handle
2. Mains cable and plug
3.
4 Pump casing
.
Built-in float switch
Hose adapter for pressure connection
3
4
6
5.
7
5
1
2
6. Pump base
7. Automatic-Manual change-over switch
Содержание SP7580
Страница 1: ...SP7580...
