Nakayama PRO PH2500, Руководство пользователя

Страница: 17 / 18

17
WWW
.N
AKAYAMA
T
OOLS
.
COM
8. Storage
1. Oil the blade to prevent rust.
2. Empty the fuel tank and put the cap back on.
3. Remove the spark plug, pour a small amount of oil into the cylinder.
4. Rotate the crankshaft several times using the starting rope in order to distribute the oil. Put the spark plug back
in.
5. Wrap the engine with a plastic sheet.
6. Store the trimmer in a dry place, preferably not in direct contact with the floor and away from heat sources.
9. Disposal
• When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations.
10. Troubleshooting guide
Case 1. Starting failure
CHECK PROBABLE CAUSES ACTION
fuel tank incorrect fuel drain it and with correct fuel
fuel filter fuel filter is clogged clean
carburetor
adjustment
screw
out of normal range adjust to normal range
sparking (no
spark)
spark plug is
fouled/wet
clean/dry
plug gap is incorrect correct (GAP: 0.65 mm)
spark plug
disconnected
retighte n
Case 2. Engine starts but does not keep running/Hard re-starting.
CHECK PROBABLE CAUSES ACTION
fuel tank incorrect fuel or
staled fuel
drain it and with
correct fuel
carburetor
adjustment screw
out of normal
range
adjust to normal
range
muffler,cylinder
(exhaust port)
carbon is built - up wipe away
air cleaner clogged with dust wash
cylinder fin, fan
cover
clogged with dust clean
When your unit seems to need further service, please consult with our service shop in your area.