Nakayama PC3100, Руководство пользователя

Страница: 8 / 26

EN
8
WWW.NAKAYAMATOOLS.COM
Description of main parts
1. Rear handle
2. Throttle interlock
3. Throttle trigger
4. Ignition switch
5. Front hand guard (Chain brake lever)
6. Saw chain
7. Guide bar
8. Sprocket wheel
9. Spiked bumper
10. Retaining nut
11. Bolt
12. Oiling port
13. Chain catcher
14. Drive sprocket
15. Clutch
16. Tension screw
a. Tension pin
17. Cover
18. Air vents
19. Choke knob
20. Air filter cover
a. Fixation screw
21. Air filter
22. Attachment point
23. Spark plug connector
24. Recoil starter handle
25. Adjustment screw
26. Chain oil tank cap
27. Fuel tank cap
28. Primer
29. Front handle
30. Guide bar cover
31. Multitool
32. Chain file
33. Slot head screwdriver
34. Fuel mixing container
35. Ignition switch
36. Throttle interlock
37. Choke knob
38. Throttle trigger
39. Oiler and adjustment screw for lubrication
Technical Data
Model: PC3100 PC3500 PC3530
Displacement: 25.4 cc 25.4 cc 25.4 cc
Bar Length: 25cm 25cm 25,4cm
Chain Type: 3/8'', 1,3mm 3/8"LP, 1,3mm 1/4"LP, 1,3mm
* The manufacturer reserves the right to make minor changes to product design and
technical specifications without prior notice unless these changes significantly affect the
performance and safety of the products. The parts described / illustrated in the pages of
the manual that you hold in your hands may also concern other models of the manufac -
turer's product line with similar features and may not be included in the product you just
acquired.
* Please note that our equipment has not been designed for use in commercial, trade or
industrial applications. Our warranty will be voided if the machine is used in commercial,
trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair,
inspection, repair or replacement work, including maintenance and special adjustments,
must only be carried out by technicians of the authorized service department of the
manufacturer.
Safety Precautions
Before using the machine
a. Read this owner’s manual carefully to understand how to operate this unit properly.
b. You should never use the product when under the influence of alcohol,when suffering from exhaustion or lack of sleep ,when suffering from drowsiness as
as a result of having taken cold medicine ,or at any other time when a possibility exists that your judgment might be impaired or that you might not be able
to operate the machine properly and in a safe manner .
c. Avoid running the engine indoors .The exhaust gases contain harmful carbon monoxide.
d. Never use the product under circumstances like those described below :
1. When the ground is slippery or when other conditions exist which might make it not possible to maintain a steady posture .
2. At night ,at times of heavy fog ,or at any other times when you field of vision might be limited and it would be difficult to gain a clear view of the area.
3. During rain storms ,during lightning storms ,at times of strong or gale-force winds ,or at any other times when weather conditions might make it unsafe to
use this product.
e. When using this product for the first time ,before beginning actual work ,learn to handling it from skilled worker .
f. Lack of sleep ,tiredness,or physical exhaustion results in lower attention spans ,and this in turn leads to accidents and injury. Limit the amount of time of
using the machine continuously to somewhere around 10 minutes per session ,and take 10-20 minutes of rest between work sessions . Also try to keep the
total amount of work performed in a single day under 2 hours or less.
g. Be sure to keep this manual handy so that you may refer to it later whenever any questions arise .
h. Always be sure to include this manual when selling ,lending ,or otherwise transferring the ownership of this product .
i. Never allow children or anyone unable to fully understand the directions given in this manual to use this product.
Working Gear And Clothing
a. When using the product, you should wear proper clothing and protective equipment:
Helmet
Protection goggles or face protector
Thick work gloves
Non-slip sole work boots
Ear protectors
b. And you should carry with you: